MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 155

Stelvio 1200 NTX ABS
020716Y Connecting rod locking
•
Remove the piston ring clamp tool and
finish positioning the cylinder.
Specific tooling
020674Y Piston ring clamp
•
Fit the movable chain slider.
•
Fit the upper gear.
•
Fit the chain tensioner and the chain
tensioner cap temporarily and keep the
chain taut on the service shaft.
LEFT CYLINDER
•
Fit the piston.
•
Remove the cloth used to prevent for-
eign bodies from getting into the crank-
case.
•
Turn the rings so that the coupling ends
are 120 degrees from each other.
•
Place a new metal gasket between the
crankcase and the cylinder.
•
Place the two dowel pins on the stud
bolts.
•
Undo the screw which will be used to
time the upper gear.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Engine
ENG - 155