MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 147

Stelvio 1200 NTX ABS
•
Lock crankshaft rotation.
•
Unscrew and remove the nut fixing the
crankshaft gear.
•
Remove the oil pump control gear.
Specific tooling
12.91.18.01 Tool to lock the flywheel and the
starting ring gear
•
Fit the timing system gear and align the
reference with that on the crankshaft
gear. Turn the crankshaft to align the
two gears.
•
After shimming the timing sensor prop-
erly, proceed to fit it.
•
Fit the washer and tighten the timing
system gear fixing nut of the service
shaft.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Engine
ENG - 147