Engine Oil Filter - MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual

Stelvio 1200 NTX ABS
•
Place a container with +4,000 cm³ (244
cu in) capacity under the drainage plug
(3).
•
Unscrew and remove the drainage
plug (3).
•
Pull out the oil filler plug / engine oil
level dipstick (4).
•
Drain the oil into the container; allow
several minutes for oil to drain out com-
pletely.
•
Insert the oil filler plug / engine oil level
dipstick (4).
•
Check and if necessary, replace the
drainage plug (3) sealing washers.
•
Remove any metal deposits attached
to the drainage plug (3) magnet.
•
Screw and tighten the drainage plug
(3).
DO NOT DISPOSE OF OIL INTO THE ENVIRONMENT.
DISPOSE OF ENGINE OIL STORED IN A SEALED CON-
TAINER AND TAKE IT TO YOUR SUPPLIER OR TO THE
NEAREST USED OIL RECLAMATION FIRM.

Engine oil filter

Replace the engine oil filter each time you
change the engine oil.
•
Drain the engine oil completely.
•
Unscrew and remove the engine oil fil-
ter from its seat.
NOTE
NEVER REUSE AN OLD FILTER.
•
Spread a thin layer of oil on the sealing ring of the new engine oil filter.
•
Fit and screw the new oil filter in its seat.
See also
Replacement
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Maintenance
MAIN - 35