Checking And Topping Up; Gearbox Oil - MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual

Hide thumbs Also See for Stelvio 1200 NTX ABS:
Table of Contents

Advertisement

Maintenance

Gearbox Oil

Inspection

CHECKING AND TOPPING UP

CAUTION
ENGINE MUST BE WARM TO CHECK GEARBOX OIL LEVEL.
NOTE
DO NOT LET THE ENGINE IDLE WITH THE VEHICLE AT STANDSTILL TO WARM UP THE ENGINE
AND REACH THE OPERATING TEMPERATURE OF ENGINE OIL. OIL IS BEST CHECKED AFTER
RUNNING FOR ABOUT 15 KM (10 miles).
Shut off the engine.
Keep the vehicle upright with both
wheels on the ground.
Unscrew and remove the cap/dipstick
(1) placed on the gearbox right side.
• The level is correct if the oil is on the
rim of the hole of the cap/dipstick (1).
If necessary:
Top-up with oil until it reaches the dip-
stick opening (1).
CAUTION
DO NOT ADD ADDITIVES OR ANY OTHER SUBSTANCE TO
THE FLUID. WHEN USING A FUNNEL OR ANY OTHER EL-
EMENT, MAKE SURE IT IS PERFECTLY CLEAN.
Replacement
NOTE
HOT OIL IS MORE FLUID AND WILL DRAIN OUT MORE EASILY AND COMPLETELY.
• Place a container with suitable capacity under the
drainage plug (2).
• Unscrew and remove the drainage plug (2).
• Unscrew and remove the filler cap (1).
• Drain the oil into the container; allow several mi-
nutes for oil to drain out completely.
• Check and replace, if necessary, the sealing
washers of drainage plug (2).
• Remove any metal scrap attached to the drain-
age plug (2) magnet.
• Screw and tighten the drainage plug (2).
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
MAIN - 36
Stelvio 1200 NTX ABS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents