MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 141

Stelvio 1200 NTX ABS
•
Place the valve guide oil seal (4) in the
head.
•
Place the lower cap (5).
•
Place the valve (6) inside the head.
•
Place the spring (3).
•
Fit the upper cap (2).
•
Place the two cotters (1) on the seats
in the valves.
•
By compressing the spring (3) with the
special tool, fit the valve cotters.
Specific tooling
10.90.72.00 Tool for valve removal and refitting
AP9100838 Tool for valve pressure plate
•
Remove the special tool
Installing the rocker arms
•
Fit the camshaft.
•
Fit the two rods.
WARNING
MAKE SURE THAT THE NOTCH ON THE DIPSTICK BODY
FACES THE ROCKING LEVER.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Engine
ENG - 141