MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 143

Stelvio 1200 NTX ABS
•
Place the camshaft with the gear seat
on the dowel side.
•
Place the U-bolt on the camshaft mak-
ing sure the two reference pins match
the seats on the cam tower.
•
Tighten the four screws operating di-
agonally and in stages.
Timing
Removing the phonic wheel
•
Remove the generator and the timing
system cover.
•
Unscrew and remove the nut and col-
lect the washer.
•
Remove the timing system gear on the
service shaft.
•
Remove the timing sensor and any
shim washers.
•
Remove the tone wheel.
•
Remove the cotter and shim washer
from the service shaft.
See also
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Engine
ENG - 143