Removing The Valves - MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual

Engine
WHEN REMOVING THE COMPONENTS, MARK THE POSITION OF EACH PART VERY CARE-
FULLY IN ORDER TO PLACE THEM IN THEIR ORIGINAL POSITION UPON FITTING.
•
Remove the cam cap from the stud
bolts.
•
Undo and remove the two screws.
•
Remove the U-bolt.
•
Remove the two rocking levers from
the cam cap.
See also
Removing the cylinder head

Removing the valves

•
Remove the head.
•
Place the special tool on the upper cap
and at the centre of the head of the
valve to be removed.
Specific tooling
10.90.72.00 Tool for valve removal and refitting
AP9100838 Tool for valve pressure plate
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ENG - 138
Stelvio 1200 NTX ABS