MOTO GUZZI Stelvio 1200 NTX ABS Service Station Manual page 201

Stelvio 1200 NTX ABS
Bending limit:
0.2 mm (0.00787 in)
Sleeve
Check that there are no damages and/or cracks; otherwise, replace it.
Spring
Check the spring is in good conditions.
Check that the following components are in good
conditions:
•
upper bushing;
•
lower bushing;
•
pumping member pin.
If there are signs of excessive wear or damage, replace the affected component.
CAUTION
REMOVE ANY IMPURITY IN THE BUSHINGS, TAKING CARE NOT TO SCRATCH THEIR SUR-
FACE.
Replace the following components with new ones:
•
sealing ring;
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Suspensions
SUSP - 201