Back Side; Rear Section - MOTO GUZZI Stelvio 1200 NTX Service Manual

STELVIO 1200 NTX
TABLE E - BATTERY COMPARTMENT HOUS-
ING
•
The battery housing must be free of
any connections or pipes, in order to
allow perfect fitting.

Back side

CAUTION
ONCE THE ELECTRICAL SYSTEM IS REFITTED, THE CONNECTORS RECONNECTED AND
CLAMPS AND RETAINERS RESTORED, CARRY OUT THE CHECKS INDICATED UNDER "SPE-
CIAL CHECKS FOR THE CORRECT CONNECTION AND LAYING OF CABLES" IN THE "ELEC-
TRICAL SYSTEM INSTALLATION" SECTION.

REAR SECTION

TABLE A - CORRECT FITTING OF THE ODOM-
ETER CLAMP
•
The clamp fixing the odometer cable
must be placed ahead of the brake pipe
guide clamp.
REAR SECTION
TABLE B - FITTING THE FAIRING COMPART-
MENT LID SAFETY RELAY
•
Lay down the main system and clamp
the stop switch system, odometer sen-
sor and fall sensor to the system. Be
careful that the latter does not come
into contact with clips.
•
Attach the relay to the support plate
and fix it keeping the main system be-
tween the plate and the mudflap.
•
Connect the recharge cable and place
it as in the photo.
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Electrical system
ELE SYS - 47