Electrical system
Back side
TABLE A - WIRING ON THE SEAT PILLAR
1. Medium sized cable ties
Once the lower seat pillar closing is mounted, re-
move the two clamps (1)
TABLE A1 - WIRING ON THE SEAT PILLAR
•
Proceed as indicated in the figure
TABLE A2 - WIRING ON THE SEAT PILLAR
1. Engine control unit
Connect the engine ECU (1) and hook it to the
specific plastic base
TABLE A3 - WIRING ON THE SEAT PILLAR
1. Secondary fuses
Fasten the secondary fuses box in the specific
supports, taking care to run the wiring on the ex-
ternal side
ELE SYS - 52
V85 TT