Removing The Left Or Right Side Panel; Figure 3-3 Removing The Enclosure Side Panel - Silicon Graphics Prism Hardware User's Manual

Removing the Left or Right Side Panel

007-4772-002
Follow these steps to open the left or right side of the enclosure:
1. Press the panel release button on the rear of the enclosure. Then swing the top edge
of the panel away from the enclosure (see Figure 3-3).
2. Lift the panel until the hooks on the bottom edge clear the lip on the base of the
enclosure. Then swing the bottom edge of the panel away from the enclosure and
place it in a safe location (see Figure 3-3).
Panel
release
button
US
B
1
2
3
L1
4 UP
LI NK
B1 -S
1
B2 -S
2
B2 -S
1
B3 -S
2
B3 -S
1
B4 -S
2
B4 -S
1
AG
P- 6
AG
P- 5
Figure 3-3 Removing the Enclosure Side Panel
If you only need to remove the left or right side panel, proceed to "Installing or
Removing Internal Parts" on page 50. If you need to remove the bezel of the system,
proceed to the next section.
US
B
1
2
3
L1 UP
4 LIN
K
B1 -S
1
B2 -S
2
B2 -S
1
B3 -S
2
B3 -S
1
B4 -S
2
B4 -S
1
AG
P- 6
AG
P- 5
Panel
release
button
Preparing the System for Service
47