Maintenance And Upgrade Procedures - Silicon Graphics Prism Hardware User's Manual

3.
007-4772-002
Chapter 3

Maintenance and Upgrade Procedures

This chapter provides safety information and instructions for adding or removing
components from your Silicon Graphics Prism Deskside visualization system. The
following topics are covered:
• "Safety Instructions" on page 42
• "Ordering Parts" on page 43
• "Required Tools" on page 43
• "Preparing the System for Service" on page 44
• "Returning the System to Service" on page 52
• "Installing or Removing a Memory DIMM" on page 57
• "Installing or Removing Internal Hard Disk Drives" on page 64
• "Removing the DVD-ROM Drive" on page 69
• "Removing the Base I/O Board" on page 74
• "Installing or Removing PCI Boards" on page 80
• "Installing or Removing External Devices" on page 87
• "Replacing Cooling System Components" on page 87
• "Replacing Internal Cables" on page 94
• "Replacing Enclosure Components" on page 101
Caution: For your own safety and to avoid damage to the system, do not attempt to
install or remove components that are not listed in this chapter as customer replaceable.
41