Installing Or Removing Internal Hard Disk Drives - Silicon Graphics Prism Hardware User's Manual

3: Maintenance and Upgrade Procedures

Installing or Removing Internal Hard Disk Drives

64
The Silicon Graphics Prism Deskside visualization system can have one or two internal
hard disk drives. These drives are sled mounted and can easily be installed and removed.
The following sections contain instructions for installing and removing hard disk drives:
• "Installing an Internal Hard Disk Drive" on page 65
• "Removing an Internal Hard Disk Drive" on page 67
Note: You do not need to prepare the system for service to install or remove hard disk
drives. If you are replacing the drive in the upper bay, ensure that it has stopped spinning
before you remove it. If you are replacing the system disk in the lower drive bay, you
must power down the system.
007-4772-002