Table of Contents
Advertisement
Verifying Memory Installation
007-4772-002
To verify the memory installation, follow these steps:
1.
After you power on the system, check the amount of memory displayed for Main
Memory. Use the /usr/share/hwinfo inquiry to determine if the new memory
installation is recognized.
The displayed memory should equal the original amount of memory minus any
memory you removed, plus the amount of memory you installed.
2. If the amount of memory is incorrect, power off the system and check the following:
•
Check the angle of the DIMMs. They should be upright and completely seated.
•
Ensure that each group is populated with four DIMMs, and that they are the
same memory size and speed. You must have either 4, 8, or 12 DIMMs installed.
Installing or Removing a Memory DIMM
63
Advertisement
Table of Contents
Troubleshooting
