Xerox 8825 Service Manual page 124

Replacement
1. (Figure 3): Reinstall the Developer Module.
5
Move the gear to
engage
Ensure that the Developer Module is fully reinstalled in the brackets.
Ensure that the gear is free to engage the Developer Module drive gears.
NOTE: To ensure that the Toner Cartridge is correctly engaged in the Drive Plate, rotate the
cartridge in both directions.
Repairs and Adjustments
REP 9.5
4
Move the lock out of
the groove on the
gear while perform-
ing Step 5
Figure 3 Reinstalling the Developer Module
CAUTION
CAUTION
1
Reinstall the Devel-
oper Module
3
Reconnect A2PP1
01/02
4-56
2
Press tab and swing
up Clamp Bar until it
locks (one each
end)
8825/8830 Printer