Xerox 8825 Service Manual page 159

2. (Figure 5): Reinstall the bracket (Left side).
2
Reinstall the screws and
the bracket
Figure 5 Reinstalling the Bracket (Left side)
8825/8830 Printer
3. (Figure
1
Connect the
connector
4. Ensure that the Thermistor Pad is clean.
01/02
4-91
6): Reinstall the grommet and the bracket (Right side).
2
Reinstall the bracket onto
the grommet
3
Reinstall the screw and
the bracket
Figure 6 Reinstalling the Bracket (Right side)
1
Reinstall the grommet
onto the Heat Rod wire
4
Connect the connector
and put the wire into the
clamp
Repairs and Adjustments
REP 10.1