Rep 10.9 Web Oiler - Xerox 8825 Service Manual

Replacement
Do not bend the Stripper Finger too far or it will break.
1. (Figure 2): Reinstall the Stripper Fingers.
1
Squeeze the
Stripper Finger
Figure 2 Reinstalling the Stripper Fingers
Repairs and Adjustments
REP 10.8, REP 10.9
CAUTION
3
Align the tabs to
straighten the finger
2
Push the Stripper Finger on until the
tab snaps up

REP 10.9 Web Oiler

Parts List on PL 9.7
Switch off the Main Power Switch. Disconnect the Power Cord.
Wear protective gloves when handling parts with silicone oil on them. Do not allow sili-
cone oil to contact your eyes. Silicone oil can cause severe eye irritation. Wash your
hands immediately after handling any component covered with silicone oil.
Removal
1. Remove the Web Oiler Assembly and place it top down, resting on the handles, on a flat
surface (REP 10.7).
2. (Figure 1): Remove the Supply Roll.
Supply Roll
Figure 1 Removing the Supply Roll
01/02
4-94
WARNING
WARNING
1
Pull the knob to release the Sup-
ply Roll (rotate to lock)
RH Side Plate
8825/8830 Printer