2.
(Figure
1): Remove the Sump Shield.
1
Remove the screws (2)
5
Remove the Sump
Shield
Figure 1 Removing the Sump Shield from the Developer Module
8825/8830 Printer
2
Loosen the screws (2)
3
Remove the Top
Shield
4
Remove the Sump
Shield from under the
edge (full length)
Replacement
Ensure that the full length of the edge of the Sump Shield is under the edge of the housing.
1.
(Figure
2): Reinstall the Sump Shield in the Developer Module.
01/02
4-73
CAUTION
Repairs and Adjustments
REP 9.13