1
Position the Sump Shield
Figure 11 Reinstalling the Sump Shield
19. (
Figure
12): Reinstall the Top Shield, rear edge first.
General Procedures
Installation Procedure
2
Reinstall the edges of the shield
under the edge on the housing
01/02
6-34
1
Reinstall the Top Shield
2
Reinstall the
screws
Figure 12 Reinstalling the Top Shield
Ensure that the Developer Module is kept close to the Printer frame during reinstallation in
order to avoid damage to the Toner Dispenser Motor.
20.
(Figure 13
): Reinstall the Developer Module.
3
Tighten the
screws
CAUTION
8825/8830 Printer