Xerox 8825 Service Manual page 113

9. (Figure 4): Move the bearing out of the Xerographic Module Frame (Left Side).
2
Lift the Drum Assembly and
move the bearing to the right
1
Disconnect the retain-
ing clip that holds the
bearing and rotate the
clip out of the way
Figure 4 Moving the Bearing (Left Side)
8825/8830 Printer
10.
Drum Assembly
3
Carefully lower the
Drum Assembly
01/02
4-45
(Figure 5): Move the bearing out of the Xerographic Module Frame (Right Side).
3
Drum Assembly
Holding the gearbox out of the grommet, move the
Drum Assembly to the right while moving the bearing
out of the frame (Without Tag 8)
Figure 5 Moving the Bearing (Right Side)
2
Discon-
nect P/J 1
1
Loosen the wing nut
and rotate the gearbox
to disengage the
bracket from the grom-
Repairs and Adjustments
REP 9.1