Pq 22 Offsetting - Xerox 8825 Service Manual

PQ 22 Offsetting

Table 1 Offsetting Symptom / Check
Symptom/ check Probable Cause
Offsetting is the result of toner
adhering to the Fuser Heat
Roll and transferring to subse-
quent prints.
1. There is insufficient fuser
oil on the Heat Roll.
2. The fuser temperature is
out of specification.
3. The Fabric Guide is not
contacting the Fuser Heat Roll
uniformly.
4. Media is damp.
5. Damaged or contaminated
heat roll
Print Quality
PQ 22
Corrective Action
1A. Check/replace the Web
Oiler ( REP 10.7).
1B. Check/adjust oil dispense
rate [10-32].
2. Check Fuser Temperature
( ADJ 10.1).
3. Check / replace the Fabric
Guide ( REP 8.9) and Pres-
sure Plates ( REP 8.5).
4A. Ensure that the media is
stored correctly.
4B. Refer to BSD 7.1 and
BSD 7.3 to check for correct
operation of the paper heat-
ers.
5. Clean or replace the Heat
Roll ( REP 10.2).
01/02
3-20 8825/8830 Printer