Xerox 8825 Service Manual page 163

3. (Figure 2): Remove the Takeup Roll.
3
Pull the Takeup Roll
off the RH Side Plate
(far side)
4
Pull the Stub Shaft/
Gear Assembly from
the Takeup Roll
1
Disengage the spring
from the stop on the
Side Plate
Figure 2 Removing the Takeup Roll
Replacement
1. (Figure 3): Reinstall the Supply Roll.
8825/8830 Printer
2
Pull the Stub Shaft /
Gear Assembly from
the LH Side Plate
LH Side Plate
Spring Stop
1
Mount the opposite
end of the Supply
Roll onto the LH Side
Plate
Supply Roll
2
Pull the knob and lock on
the Supply Roll
Figure 3 Reinstalling the Takeup Roll
01/02
4-95
RH Side Plate
Repairs and Adjustments
REP 10.9