Xerox 8825 Service Manual page 157

4. (Figure 2): Disconnect the Heat Rod and remove the bracket (Left side).
1
Disconnect the
connector
Figure 2 Removing the Bracket (Left side)
Wear gloves or wrap a sheet of paper around the Heat Rod when handling the Heat Rod. Do
not touch the glass section of the Heat Rod. Oil from fingers can cause damage to the Heat
Rod.
8825/8830 Printer
2
Remove the screws
(2) and the bracket
Bracket
CAUTION
5. (Figure 3): Remove the Heat Rod.
1
Remove the
Heat Rod
2
Push the pin while
removing the Fuser
Hub Assembly
Figure 3 Removing the Heat Rod and Fuser Hub Assembly
Replacement
Wear gloves or wrap a sheet of paper around the Heat Rod when handling the Heat Rod. Do
not touch the glass section of the Heat Rod. Oil from fingers can cause damage to the Heat
Rod.
01/02
4-89
Fuser Hub Assembly
Pin
CAUTION
Repairs and Adjustments
REP 10.1