Product Demonstration - Xerox 8825 Service Manual

12. Figure 23): Record the Media Counter readings onto the Service Call Report. Record and
report any accessory Serial Numbers (i.e., Finisher, Controller).
13. Separate the First Call Report card from the Installation Quality Report card and insert the
First Call Report card into the Machine Log.
3
1
Enter the reading Access the Control
from the Media Panel menu and record
Counter here the Meter A reading
Figure 23 Recording the Print Count Readings
14. Record the following on the Printer Installation Quality Report card:
• Print count readings
– 8830: Media Counter, Meter A and Meter B
– 8825 Media Counter, Meter A
• Printer serial number
• Installation date
• Comments
15. Mail the Printer Installation Quality Report Card.
General Procedures
Installation Procedure, Product Demonstration
2
(8830 only) Access the Control
Panel menu and record the Meter
B reading

Product Demonstration

50 Hz machines only:. Do not run program 3-60-3 as this will cause all settings on the Printer
to be lost.
To demonstrate the capabilities of the Printer, refer to the User Guide. Perform the following
procedures to train an operator.
1. Getting to know your Printer
2. Control Console
3. Loading the media
4. Making prints using roll media
5. Adding Toner and how to clear the J1 Status Code
6. Problem solving status codes
7. Clearing the Printer
01/02
6-40
CAUTION
8825/8830 Printer