Xerox 8825 Service Manual page 278

1 2
Rotate the bolts to adjust Repeat Step 1 at the other
the level of the printer end of the printer
Figure 19 Adjusting the side-to-side level
30. Figure 20: Adjust the front-to-rear level of the Printer.
General Procedures
Installation Procedure
Rotate the bolts equally to
adjust the level of the
printer
Figure 20 Adjusting the Front-to-Rear Level of Printer
31. Figure 21: Check the level of the printer.
Determine level of printer
Figure 21 Checking and Adjusting the Printer Level
32. Repeat the Printer leveling (Steps 27 through 30) until the Printer is level.
01/02
6-38 8825/8830 Printer