REP 8.3 Buckle Switch
Parts List on
PL 8.4
Switch off the Main Power Switch. Disconnect the Power Cord.
Removal
1.
Latch the Xerographic Module at the Service Position
2.
Remove the Media Transport Assembly
3.
Remove the Fabric Guide
(REP
8.9).
4.
Remove the Pressure Plates
(REP
5.
(Figure
1): Remove the Buckle Switch.
a.
Remove the screw.
b.
Carefully pull the Buckle Switch Assembly until the connector can be disconnected.
c.
Disconnect the connector.
d.
Remove the Buckle Switch from the bracket.
Repairs and Adjustments
REP 8.3
WARNING
(REP
9.2).
(REP
8.1).
8.5).
Screw
Figure 1 Removing the Buckle Switch
01/02
4-24
Buckle Switch
Buckle Switch Assembly
8825/8830 Printer