Table of Contents
Advertisement
1. Precautions
1-1. Precautions for the Service
● Use the standard parts when replacing the electric parts.
– Confirm the model name, rated voltage, rated current of the electric parts.
● Repair the disconnection of HARNESS securely when repairing the break down.
– If there is any connection error, it causes an abnormal noise and incorrect operation.
● In case that you assemble or disassemble the products with laying it on the side, do work on the work cloth.
– If not, the exterior of products can be scratched.
● Remove dust and foreign materials from harness, connection part, and inspection part thoroughly when repairing
the break down.
– It protects the danger of fire such as tracking and short.
● Check the assembly status of parts after repairing the break down.
– It should be same as the status before repairing.
1-2. Precautions for the Static Electricity and PL
● As the PCB power terminal has a weakness for the static electricity, pay attention to it during the repair and measurement.
– Work with insulation gloves during the repair and measurement of PCB.
● Check the distance between the product and the other electronic appliances such as TV, video, and audio.
It should be over 2m.
– If not, it causes a bad picture quality or a noise.
● Repairing the products by consumer should be strictly prohibited.
– There is a danger of electric shock or fire due to incorrect disassembly.
1-3. Precautions for the Safety
● Do not pull any electric wires and do not touch an auxiliary power switch with a wet hand.
– There is a danger of electric shock or fire.
● In case any wire or power plug has been damaged, replace it to eliminate any possible danger.
● Do not bend the power cord by force and do not put any heavy object on the power cord.
– There is a danger of electric shock or fire.
● Do not use multi socket.
– There is a danger of electric shock or fire.
● Ground the product if necessary.
– Be sure to ground the product if there is any danger of electric leakage due to water or moisture.
● Be sure to turn off the auxiliary power switch or pull out the power plug during replacement or repair of electric parts.
– There is a danger of electric shock.
Samsung Electronics
BACnet Gateway_E_32400A(1)_1.indd 1
1-1
2010-05-17
10:34:39
Advertisement
Table of Contents
