System Problems - Gateway 7400 System Manual

System problems

The system will not start up.
Probable cause
The system is not connected
to an AC outlet
The voltage selection switch
is not set correctly
The system is non-responsive.
Probable cause
An error occurred while
running a program or your
system may be out of
memory
Heatsink is not seated
116
Troubleshooting
Solution
Make sure the power cable(s) are connected
correctly to an operating AC power source.
Make sure the voltage selection switch is set
to the correct power source.
Solution
Restart your server by pressing the reset
button. If the system is still non-responsive,
press and hold in the power button for 4
seconds to turn the system off. Turn the
system back on and follow the on-screen
instructions.
Reseat the heatsink.