Tuned Pipe/Cowl Installation - AeroWorks Extra 300 ARF-QB Assembly Manual

Tuned Pipe Installation
Gather the tuned pipe parts as shown:
Shown: 100cc Greeves Tuned Pipes
70mm Drop flex headers
Teflon Couplers
Mounting Clamps
1. Using a covering iron seal the covering around
the air exit holes as shown below.
TUNED PIPE/ COWL INSTALLATION
2. Use a hobby knife to remove the covering
around the hot air exit holes.
3. Remove the covering over the stinger exit. This
will allow the pipe stingers to exit the fuse.
60