Easy Mode - GLP SCAN OPERATOR FX II User Manual

4.22

Easy Mode

The EASY mode serves for fast tests of DMX fixtures or as additional Faderdesk for
larger DMX Desks, which for which a DMX Faderunit is sense full.
Here 12 Fixtures with 10 channels each are used. The values of the channels are
specified over the 10 Faders of the set (including Fade time and speed). The scene
keys serve as Flash keys for the first 8 channels of each set.
The Blackout scene switches all 120 DMX channels to 0. Other functions (up to the
Desklock function) are deactivated.
In EASY mode you can change DMX values as follows:
1. In order to get to the EASY mode, press the PROGRAM+SETUP key for
3s. The Display now shows the Text "Easy".
2. Now select the Fixtures, which channels you would like to change.
3. You can change the values of the 10 channels per fixture over the
Fader. The PAGE key is functionless.
4. Repeat the steps 2 and 3, in order to use other devices.
Hint:
You can test fast and simply DMX sets in EASY mode or use this desk as
"dummy" DMX Faderunit for larger desks.
5. The scenes keys have the function of a Flashkey in this mode. As long
as one of these keys are pressed, this channel will be sent with a value of
"255" This is then indicated in the display by the text "Flash".
Hint:
The channels 9 and 10 do not have Flash key.
53/57