Running A Chaser With Music Trigger; Freeze Function - GLP SCAN OPERATOR FX II User Manual

4.19.3 Running a Chaser with Music Trigger

1. Select the desired Chaser of 1-6. By renewed pressing of the Chaser key
you deactivate it again.
Hint:
Several Chasers can be selected at the same time. These run off then
successively.
1. Press the MUSIC/BANKCOPY key to call up music function. The music
LED lights up.
2. Select, with the speed and Fade time faders the desired expiration effect..
Hint:
You can use the TAPSYNC/MANUAL GO Button at any time, if the device is
not running in Auto Trigger Mode, to manually advance to the next Scene.
This is useful for example in Music Trigger, if you wish to go on to the next
Scene manually during a silent part of the music.
4.20

Freeze function

The Freeze function freezes the current DMX output until its deactivation. This is useful,
if you want stop the entire movement briefly, and to let it run again after a short time as
before.
All parameters are maintained. This also means that for example the Auto Trigger for
each Fixture stays in sync after a Freeze.
1. This function is available only in Play mode
2. Pressing the FREEZE button toggle the freeze function On and Off.
48/57