Copying A Complete Scene Bank; Deleting Scenes; Deleting Scene Banks - GLP SCAN OPERATOR FX II User Manual

4.6.5 Copying a complete Scene Bank

1. Activate PROGRAM mode (PROGRAM Key).
2. Press the BANK UP/DOWN key to call up the desired bank you would like to
copy.
3. Press the RECORD key.
4. Press the BANK UP/DOWN key until you reached the bank you would like to
copy to.
5. Press the MUSIC/BANK COPY key. As memory confirmation you receive the
message "BANK COPY".
6. Press the PROGRAM key for 3 seconds to leave the PROGRAM mode again.

4.6.6 Deleting Scenes

1. Select the bank, in which the scene that shall be deleted is located.
2. Keep the DELETE key pressed and press the scenes key of the scene that
you would like to delete. As confirmation you receive the message "Scene
Deleted".
Attention:
A deleted scene cannot be restored again!

4.6.7 Deleting Scene Banks

1. Select the bank, which you would like to delete.
2. Keep the DELETE key pressed and press the MUSIC/BANK key at the same
time.
3. All scenes of this bank were deleted. For confirmation you receive the
message "Bank Deleted".
19/57