Deleting An Effect; Running An Effect - GLP SCAN OPERATOR FX II User Manual

the "FX CLEAR" key.
11. As soon as you finish the providing of the effects, leave the effect editor
again by pressing the "FX editor" key. You can now, as usual, store the DMX
effect into a scene.
12. If you finished the storing of the scenes, then you leave the PROGRAM
mode again pressing the PROGRAM key for 3 seconds.

4.11.5 Deleting an Effect

If you are in the "Program mode", then you can delete the adjusted effect of all selected
Fixtures at any time by pressing the "FX CLEAR" key. It is not necessary to activate the
effect editor.
Please, note the fact that if you want to delete the effect from an already created scene,
you have to load the scene first, then delete the effect and afterwards you must store
the scene again.

4.11.6 Running an Effect

The provided effects are a part of a scene. The effects are thus played automatically
with the scenes, into which they are stored.
34/57