Rear View - GLP SCAN OPERATOR FX II User Manual

Manual Go key
17. Blackout key
18. Release key
19. FX Editor key
20. FX Clear key
21. Create Wave key
22. Randomize key
23. Chaser keys

2.2 Rear View

1. MIDI IN
2. DMX Out
3. DC Input
and learns the timing. The LCD Display then changes between
chaser steps and the current bank.
With the Blackout key you can overwrite the DMX Output with
self defined data you configured before. For example all
Shutter channels with data "0".
The release key clears all manual changes
This key activates the Effect editor in program mode.
This key deletes the adjusted effects.
This key changes the starting angle of all selected fixtures
automatically, so that the fixtures will run the current effects
like a wave.
This key randomly changes the first angle of all selected
fixtures and generates randomized samples.
Here you access the 6 chasers.
MIDI Input (DIN 5-Pin)
DMX Output (XLR 3-Pin)
DC +9V, 500mA min.
8/57