Using The Pan And Tilt Encoder Wheel; Desklock Function - GLP SCAN OPERATOR FX II User Manual

4.14.2 Using the Pan and Tilt Encoder wheel

You can use the pan and Tilt Encoder of wheels both in the Program and in the Play
mode. The Encoder wheels change the accordingly configured Pan/Tilt DMX channels
in each case.
The Fine button regulates if, whether per click on the Pan/Tilt wheels, either to 1 DMX
step (Fine On) or 8 DMX steps (Fine Off) are made.
4.15

Desklock Function

The CONTROLLER offers a Desklock function, which can disable the user interface and
block any user interaction. You activate and/or deactivate the Desklock by pressing the
PAGE SELECT key while you are already keeping the PROGRAM and SETUP key
pressed together.
While the Desklock is active, all user inputs are ignored. The MIDI input is not affected
by the Desklock.
Toggling power to the device deactivates the Desklock as well unless you have set it up
in the autostart setup to be activated automatically when the device is powered on.
Please read the following chapter about "Autostart function".
40/57