Selecting Midi Channel And Midi Mode - GLP SCAN OPERATOR FX II User Manual

4.21.3 Selecting MIDI channel and MIDI mode

1. To arrive at the Setup mode, press the SETUP key for 3 seconds.
You are directly in the MIDI point of menu.
2. With the Pan Encoder wheel can now adjust the MIDI channel.
3. With the Tilt Encoder wheel you can switch between the different MIDI
modes ("Synthesizer" and "Keyboard").
Important:
The changes are not automatically durably stored but they are directly active.
Therefore it is necessary that you confirm the changes for durable storing
once with the RECORD or the SETUP key.
4. Press the SETUP key for 3 seconds, to leave the Setup mode again.
52/57