Running Scene Banks (Play Mode); Running A Scene Manually - GLP SCAN OPERATOR FX II User Manual

4.17

Running Scene Banks (Play mode)

4.17.1 Running a Scene manually

1. After turning the CONTROLLER on it is automatically in the Play mode.
2. Make sure that the manual trigger mode is selected (see the "Manual LED"
to the right of the display).
3. Use the BANK UP/DOWN keys to call up the bank with the desired scenes.
4. Call up the desired scene with the scenes keys.
Hint:
You can use the TAPSYNC/MANUAL GO Button at any time, if the device is not
running in Auto Trigger Mode, to manually advance to the next Scene. This is
useful for example in Music Trigger, if you wish to go on to the next Scene
manually during a silent part of the music.
43/57