Editing The Power-On Logo; Resetting Power-On Logo; Showing The Software Version - GLP SCAN OPERATOR FX II User Manual

4.24

Editing the Power-On Logo

You can edit the Logo, which is shown when switching the Unit on, according to your
own desires. In order to do this, you switch the Unit on, while you keep the AUTO key
pressed.
You can change now change the position of the cursor with the Pan Encoder Wheel.
The letter at the selected position can be changed with the Tilt Encoder Wheel.
As soon as you finished editing the text, you need to store it with the "RECORD" key.
The display shows the message "Logo Saved". Switch the Scan Operator on and off,
again.
4.25

Resetting Power-On Logo

In order to reset the Logo, switch on the unit while pressing the AUTO button. Now
press the "DELETE" button and store the result by pressing the "RECORD" button. Now
you can restart the Scan Operator FX II.
Hint:
The Logo is not deleted, if you use the function that clears the entire show memory!
4.26

Showing the Software Version

If you keep the MUSIC/BANK COPY button pressed when switching the Unit on, the
Software Version of your Scan Operator FX II appears in the display.
55/57