Resetting The Entire Show Memory - GLP SCAN OPERATOR FX II User Manual

4.8 Resetting the entire Show Memory

This function clears and initializes the entire show memory. After the deletion the
Memory will be in the following condition:
 All scenes are deleted
 All Chaser are deleted
 All overlay scenes are deleted
 The Blackout-Key overwrites all 192 channels with the value "0"
 No channel is inverted
 The pan channel for each Fixture is channel 1
 The Tilt channel for each Fixture is channel 2
 The MIDI channel is channel 1
 The MIDI allocation is adjusted to the "MIDI keyboard" allocation
 The autostart function is deactivated
For deletion you proceed as follows:
1. The controller is switched off.
2. Hold the Program and Setup keys pressed while you switch the controller on
again.
3. For confirmation you will receive the message "MEMORY RESET".
24/57