Running A Chaser (Play Mode); Running A Chaser Manually; Running A Chaser With Auto Trigger - GLP SCAN OPERATOR FX II User Manual

4.19

Running a Chaser (Play mode)

Hint:
You have to have programmed the Chaser before in order to call it up. Empty chasers
can not be started.

4.19.1 Running a Chaser Manually

1. Select the desired Chaser 1-6. By renewed pressing of the chaser key
you deactivate it again.
2. Make sure that Auto and Music Trigger are deactivated.
3. A new started chaser is loaded directly and begins with its first step.
Hint:
Several chasers can also be selected at the same time. These run off then
successively. In the display the up-to-date running chaser appears at the end
of the first line.
4. With the Tapsync key you can move on to the next step now.

4.19.2 Running a Chaser with Auto Trigger

1. Select at least one of the desired chasers 1-6. By renewed pressing of the
chaser key you deactivate a chaser again.
Hint:
Several Chasers can be selected at the same time. These run off then
successively.
2. Press the AUTO key to call up this function. Auto LED lights up.
3. Select the desired playback time with the speed and Fade time faders
and/or with the TAPSYNC/MANUAL GO key.
47/57