Resetting All Inverted Channels - GLP SCAN OPERATOR FX II User Manual

4.13.2 Resetting all Inverted Channels

In order to reset all inverted channels, proceed as follows:
1. Activate Setup mode (SETUP key).
2. Now select "Invert" in the menu of Setup mode
3. Press the DELETE key.
For confirmation you will receive the message "Invert RESET".
Important:
The changes are not automatically durably stored but they are directly active.
Therefore it is necessary that you confirm the changes for durable storing once
with the RECORD or the SETUP key.
4. Press the SETUP key for 3 seconds, to leave the Setup mode again.
38/57