Insert A Scene Bank Into A Chaser - GLP SCAN OPERATOR FX II User Manual

4.7.2 Insert a Scene Bank into a Chaser

You might copy a whole bank into a Chaser as well. In this case the controller will insert
all existing scenes on that bank into the chaser automatically (If the chaser is containing
steps already, it will insert the steps at the end). If the bank is empty, then nothing is
inserted.
1. Activate PROGRAM mode (PROGRAM Key).
2. Select the desired Chaser with the CHASER keys 1-6.
Hint:
3. If you switch on a Chaser that is already containing steps in the program
mode, the point of editing will automatically be set to the last step of the chaser.
Inserting now takes place at the end of the Chaser. Press the BANK UP/DOWN
key to call up the bank on which the desired scenes were stored to. Press the
MUSIC/BANKCOPY key.
4. Press the RECORD key. As memory confirmation you will receive the
message "bank Inserted".
21/57