Table of Contents
Advertisement
www.glp.de
X5 IP Bar 1000
3. Features
The impression X5 IP Bar 1000 is a powerful IP65-rated LED-based linear format lighting
fixture from GLP. It features a tilting head with GLP's patented fast tilt movement
system.
The fixture contains 18 x 40 Watt RGBL LED sources. Each source features smooth, full
range color mixing with a homogenized Fresnel lens. The fixture also has motorized fast-
action zoom.
The fixture offers a powerful multi-layer color and zoom effects engine.
Fixtures feature an alignment system that lets you build unbroken lines of pixels, and
power and data can be daisy-chained for ease of installation. The impression X5 IP Bar
1000 can be placed upright on a level surface or suspended from a suitable structure
as described in the fixture's Quick Start and Safety Manual.
A filter slide-in system with mounting channels on the front of the head allows optical
accessories from GLP (such as an asymmetric beamshaper filter) to be installed in
seconds without the use of tools.
Control options
The impression X5 IP Bar 1000 is compatible with DMX 512 and RDM control protocols.
Other control options via Ethernet are currently in preparation for inclusion in a future
firmware release.
The fixture also features GLP iQ.Mesh and GLP's FPO (Flexible Protocol Option) Port with
a LumenRadio CRMX module supplied installed in the fixture as standard. The GLP
iQ.Mesh Module allows easy configuration, control, service and maintenance via the
GLP iQ.Service App. Other FPO modules can be supplied on request – GLP Service can
give details.
Powering on
When power is applied to the fixture and no valid DMX signal is present, the head
moves automatically to its home position (tilt center).
Tilt
The impression X5 IP Bar 1000 has motorized tilt movement with coarse and fine control
channels.
Direction of tilt movement
With the fixture standing on the ground, increasing the tilt DMX value moves the head
towards the front from its home position. Tilt direction can be reversed using the Fixture
Settings → Tilt Invert setting (see 'Tilt invert' on page 22) or via DMX on the
Special/Control channel. This can be useful when setting up symmetrical movement in
multiple fixtures.
8
impression
X5 IP Bar 1000 User Manual
Advertisement
Table of Contents
