Setting Up Network Print Services - imagistics ipc1-im6530 Administrator's Manual

Troubleshooting
Problem
Transfer rate says "No connection"
Transfer rate says "No connection"
Transfer rate says "No connection"
There is a connection to the access point
but the printer is not visible on the network
There is a connection to the access point,
the authentication mode is
and the printer is not visible on the
network

Setting Up Network Print Services

The following topics explain how to configure network printing services.
Configuring Bluetooth (Option)
If you intend to use the bluetooth wireless networking option, you must
enable and configure bluetooth network settings.
104
im6530, im8130
Solution
Verify the access point is working
Verify SSID matches the access point
Verify WEP against the access point
Verify that the indicated settings on the
Intel card are all disabled. If it still fails,
increase the
Verify that the indicated settings on the
, Intel card are all disabled. If it still fails,
Open System
make sure that the
and the Access Point (AP) match.
Transmit Power Setting
of the client
WEP key
ipc1-im8130 Administrator's Guide
.