imagistics ipc1-im6530 Administrator's Manual page 319

Corrective Action
1 Open the Printers folder from the Control Panel.
2 Right-click the Imagistics printer driver icon.
3 Select
4 Depending on the operating system, select the following tab:
In Windows 98/Me/2000/XP:
Select Details. Browse to
select the printer or Novell
queue.
5 Make sure that the path to the printer and the device name are
correct: \\<device name \<driver>.
Where <device name> is the same as the device name set from the
copier LCD touch screen. <driver> should be one of the following
Imagistics drivers:
6 Click the
settings are correct.
Command Line Options Not Processed by the Controller
Problem Description
All print options are sent to the controller at the start of the print job. If
the print file already contains print commands, they override the
command line options you set. For example, if the print file specifies the
letter media, and you specify the A4 media option with the lp command,
the document is output on letter size paper (provided, of course, that all
copier-related restrictions have been met).
Corrective Action
Change the properties in the document you want to print and recreate the
print file. Submit the print job using the lp command without setting
additional parameters.
ipc1-im8130 Administrator's Guide
im6530, im8130
from the shortcut menu.
Properties
GL_PCL6
GL_PS
Tab and click
General
In Windows NT:
Select Ports. Add a new
port and map it to the
printer. Refer to the
Operator's Guide for
instructions.
to confirm that the
Print Test Page
297