imagistics ipc1-im6530 Administrator's Manual page 190

Option Value Alternate Value
punch=2
punch=3
punch=4
If this option is not specified, the default value of nopunch is used.
This function is not available for all paper sizes and users should refer to
the copier manual for a list of compatible paper sizes. In particular, A5,
A6, and statement paper sizes do not support this function.
Example: The command to hole punch the long edge feed portrait page is
lp –o punch=1
Media Type
You can select the paper source and the media type using the following
options.
Option Value Description
Plain
Transparency
Tab
Thick1
Thick2
Cover
Insert
Special
In PostScript,
has priority over the media type and the paper source. In PCL5e the paper
size always has priority over the media type and the paper source.
If this option is not specified, the default value is used.
Example: The command to specify letterhead media type is lp –o
mtype=Letterhead
168
Hole Punch Options
<filename>.
Media Type Options
The paper source that contains plain paper is requested.
The paper source that contains transparency slides is requested.
The paper source that contains tab paper is requested.
The paper source that contains disk labels is requested.
The paper source that contains letter labels is requested.
The paper source that contains cover paper is requested.
The paper source that contains insert paper is requested.
The paper source that contains special paper is requested.
Deferred Media Selection
<filename>.
im6530, im8130
Description
Hole punch short edge without rotation.
Hole punch long edge with 180° rotation.
Hole punch short edge with 180° rotation.
is always turned on so the paper size
ipc1-im8130 Administrator's Guide