Setting The Date Format - imagistics ipc1-im6530 Administrator's Manual

1 Log in as an administrator.
2 Click the
3 Click the
4 Click the
5 In the Copier Settings window, click the
menu.
6 Select the number of copies. The im8130/im6530 digital copier
supports a maximum of 9999 copies.
Note: the output tray may need clearing if the number of pages copied
exceeds the output tray capacity.
7 Click
When you have finished setting copier attributes, you must turn the
copier off and then back on to apply your changes.
Setting Up Automatic Two-Sided Printing
Auto 2-sided Mode
for the selected device. Double-sided printing conserves paper.
1 Log in as an administrator.
2 Click the
3 Click the
4 Click the
5 Click the
6 Select the appropriate type of printing.
7 Click
When you have finished setting copier attributes, you must turn the
copier off and then back on to apply your changes.

Setting the Date Format

The
Date Format
copier.
Note: The default setting is based on the destination code of the
copier. For example, for Japan:
and North America:
ipc1-im8130 Administrator's Guide
im6530, im8130
tab.
Administration
subtab.
Device
subtab.
Copier
.
Save
enables and disables double-sided printing (duplex mode)
tab.
Administration
subtab.
Device
subtab.
Copier
Auto 2-Sided Mode
.
Save
specifies the format in which to display the date on the
Month/Day/Year
Maximum Copies
drop-down menu.
Year/Month/Day
.
drop-down
, Europe:
Day/Month/Year
,
85