imagistics ipc1-im6530 Administrator's Manual page 38

5 Press
6 To access specific protocol settings, press the applicable soft key.
For more details, refer to the following pages in this manual:
After you finish updating network or device settings, you must apply the
changes you made during the session. This process updates and reboots
the controller so the modifications can take effect. If you do not apply
your changes, they are lost when you press
Note: Check the configuration page that automatically prints upon
start up to confirm that the changes were applied.
16
. The Network Setting screen opens.
NETWORK SETTING
Network Setting Screen
TCP/IP server (see
page 17)
WINS server (see Setting Up WINS and DNS Servers
page 18)
IPX/SPX (see Configuring IPX/SPX Protocol Settings
page 18)
Ethernet speed (see
on page 20) only for Ethernet
AppleTalk (see Configuring AppleTalk Protocol Settings
page 21) only for Ethernet
im6530, im8130
Configuring TCP/IP Protocol Settings
Configuring the Ethernet Speed Settings
COPY
ipc1-im8130 Administrator's Guide
on
on
on
or the copier times out.
on