imagistics ipc1-im6530 Administrator's Manual page 198

Page Length
Specify the number of lines to print on a page with the following option.
As the im8130/im6530 systems are page printers, we cannot change the
physical length of a piece of paper, so the actual effect of this command is
to change the value for lines per inch so that the requested number of
lines is printed on the page. The actual page length may differ from this
value if the top margin or the text length option is used.
If this option is not specified, the default value is used. The minimum
page length allowable is
to .
5
For example, the command to specify 66 lines per page is lp –o pl=66
<filename>.
PCL5e Specific Controller Options
Some of the controller options only apply to plain text or PCL5e files.
Text Wrapping
The following options control text wrapping when the line reaches the
right margin.
Option Value
wrap
nowrap
If this option is not specified, the default value is used.
Example: The command to specify wrapping is lp –o wrap
<filename>.
176
Option Value
pl=<value>
5
Description
Enable automatic text wrapping.
Disable automatic text wrapping.
im6530, im8130
Page Length Option
Description
Set the lines per page to value.
. If <value> is less than
Text Wrapping Options
ipc1-im8130 Administrator's Guide
, the page length is set
5