Setting The Administrator Password - imagistics ipc1-im6530 Administrator's Manual

Setting the Administrator Password

1 Log in as an administrator.
2 Click the
3 Click the
4 In the Properties area, enter a five-digit administrator password for
the controller in the Administrator Password field. Printer Utility
requires this password for you to log in as an administrator.
5 To enter a new password, type the new password over the old
password.
6 Click
Setting the Default Start Page
1 Click the
2 Click the
3 Click
4 You can click
and restores the settings to their original states.
Setting the Default Admin Login Timeout Period
1 Log in as an administrator.
2 Click the
3 Click the
amount of time before the administrator login times out. The default
is 20 minutes.
4 Click
Resetting refreshes and restores the settings to their last saved state.
Setting the Contact Information
1 Log in as an administrator.
2 Click the
3 Click the
4 Under Properties, enter the name or title of the contact person for the
device in the
5 Click
ipc1-im8130 Administrator's Guide
im6530, im8130
tab.
Administration
subtab. The Device page opens.
Device
.
Save
tab. The Preferences page opens.
Preferences
drop-down arrow and select the start page.
Start Page
.
Save
if you have not saved your changes. This refreshes
Reset
tab.
Preferences
Admin Login Timeout Period
. You can click
Save
tab.
Administration
subtab. The Device page opens.
Device
Contact Information
.
Save
drop-down arrow and select the
if you have not saved your changes.
Reset
field.
77